Popular Pressurized Spray Solution Grip Remover ….Remove and Adjust Grips made easy, Use with Billy Bob’s Grip Solvent...Caution: Do Not use perchlorethylene as it will damage the seals in the sprayer such as:…. paint thinner, acetone, turpentine, petrol solvent etc.
Instructions for Use: Capacity for the Grip Remover is one quart. Recommended solvents are Billy Bob’s Grip Solvent. It will not damage the neoprene seals.The use of any other solvents will damage the seals. After filling the container, prime by blocking the fitting into which the needle would will be attached while simultaneously pumping the handle until fluid is comes out. Once this is done, screw the needle into the unit. The Grip Remover is now ready for use